STANDARD OPTIONS:

• Clamp Holder
• Pressure Die Holder
• Wiper Die Holder
• Overhead Tie Bar (Eliminates die deflection)
• Foot Pedal Operation
• Pressure Die Assist (Boost)
• Pressure Die Assist Rear Support Roller
• Mandrel Rod Supplied (1)
• Mandrel Lubricator
• Mandrel Extractor
• Mandrel Early Out Programmable
• PLC Controller
• Touch Screen

• Center Line Height (Bend Die)  =  130mm
• Standard Maximum Radius  =  32 inch
• Maximum Bend Angle  =  190 degrees
• Bend Angle Accuracy   =  ± 0.01 degrees
• Bending Arm Speed   =  1.0 RPM
• Maximum Tube Length Over Mandrel  =  15 FEET
• Motor  =  40hp
• Operating Pressure  =  2000PSI
• Reservoir Capacity  =  280 U.S. Gallons
• Approximate Weight  =  33000 lbs.
• Approximate Dimensions  =  20" L x 5' W x 52"H
• Clockwise Rotation  =  Standard

• Round Tube         =   8"  x  .337 Wall
• Round Pipe Size   =  6" Pipe Schedule 80