Specs:
Max. Bend Radius = 2.36"
Max. Tube Length Over Mandrel = 78.7"
Max. Degree of Bend = 0-190 Degrees
Produtivity (Bends Per Hour) = 1,300 - 1,500
Bend Speed = 36-180 Degrees/Sec.
POB Speed = 36-270 Degrees/Sec.
Feed Speed = 9.85 - 39.4 IPS
Bending Capacities:
Tube = .625" OD x .047" Wall
Pipe = .414" x .079" Wall
Bar (Round) = .236
Equipped With:
3-Axis Control
Hydraulic Mandrel Extractor
Clamp & Pressure Die Holders
Direct Acting Pressure Die
Drop Away Clamp Die
.75 kw AC Main Drive Motor
RH (Clockwise Rotation)
