810 844-0233 | info@benderparts.com
- 12820 Emerson Drive, Unit 1, Brighton, Michigan 48116
| Capacity: | ¼” to 1-1/2” OD x .065 wall |
| Max bend radius: | 8 inches |
| Direction of Bend: | CW or CCW (Specify) |
| Bend Angle: | 180° + 15° overbend for springback |
| Tube Length over mandrel: | 10 feet |
| Mandrel extractor: | Manual foot pedal |
| Collet closer: | Manual collet chuck lever |
| Calibration: | Degree of bend: 1° increments Plane of bend: 1° increments Distance between bends: 1/16” increments |
| Bend arm speed: | Adjustable to 25 RPM |
| Electrical: | 3 HP, 220/440V, 3 phase, 60 cycle motor 115 VAC controls |
| Floor space: | Length- 16’ ; Width- 4’ ; Height- 40” |
[/mk_table][/vc_column][/vc_row][vc_row][vc_column][mk_fancy_title size=”18″ font_weight=”bold” text_transform=”uppercase” font_family=”none”]Accessories and Options[/mk_fancy_title][mk_table]
| 1. Extended bed length to increase tube length over mandrel. |
| 2. Digital bend control in place of 10 DOB stops under nose of machine. |
| 3. Automatic mandrel lubricator to provide draw compound inside tube around mandrel. |
| 4. Non resetting hour meter 0 to 99,999 hours to display accumulated operating time of main motor. |
[/mk_table][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]For more click here[/vc_column_text][/vc_column][/vc_row]