810 844-0233 | info@benderparts.com
- 12820 Emerson Drive, Unit 1, Brighton, Michigan 48116
| Capacity: | ¼ to 1” O.D. ferrous ¼ to 1-1/4” O.D. nonferrous |
| Bend Radius: | 6” maximum centerline radius |
| Bend Angle: | 180° (15° overbend) |
| Tube Over Mandrel: | 8 feet |
| Mandrel Extractor: | Foot pedal, 1” stroke |
| Clamping: | Manual toggle |
| Collet Chuck: | Lever closer (draw type) |
| Stops: | 10 DOB (Degree of Bend – Angle Bent) 10 POB (Plane of Bend – Rotation of Tube) 10 DBB (Distance Between Bends) |
| Calibration: | POB and DOB 1° increments; DBB 1/16” increments |
| Size: | 12’ x 3’ 6” x 40” high |
Machine stops are rapidly and conveniently set to reproduce tubes with up to 10 bends. Once preset, tubes are quickly and accurately reproduced.
Accessories
| •Wrench Set |
| •Mandrel Rod Support & Extractor |
| •Adaptors for 2” High Tooling |
| •Universal Slide Plate |
| •Mandrel Rod Set |
| •Collet Chuck |
Options
| 1. Wiper Die Support Bracket |
| 2. Collets as required (specify tube O.D.) |
| 3. Bend, Clamp, Pressure & Wiper Dies. Also Mandrels – plus, formed end, & ball (Specify tube O.D., wall thickness, and material; bend radius and maximum bend angle.) |
| 4. Slide Plate, box type, for 2” high pressure dies. |
| 5. Adaptors for 1” high tooling. |
Connect us on Facebook by clicking here