810 844-0233 | info@benderparts.com
- 12820 Emerson Drive, Unit 1, Brighton, Michigan 48116
| Maximum Bend Angle | 180º + 15º Overbend Allowance | |
| Hydraulic Drive (Std.) | 10HP | |
| Bend Arm Speed (Max.) Adjustable | 5 -1/2 RPM | |
| Bend Arm Accuracy | Within ± 1/4º | |
| Approx. Shipping Weight (Less Oil & Tools) | 4800 lbs. | |
CAPACITY
| Capacity |
CL-300 UTB CL-300 |
|
Round Tube – 25,000 psi-YP, non-ferrous 40,000 psi-YP, ferrous 60,000 psi-YP, stainless steel |
3” X .210” 3” X .120” 3” X .065” |
| Schedule 80, steel pipe, IPS |
2 (2.375” X .218”) |
| Round bar, mild steel | 1 -7/8” |
| Centerline radius, (max.) std. | 12” |
| Tube length over mandrel, (std.) | 10’ |
Standard Features
- Hardened and ground
- Hard steel toggle pins on hard steel
- Heat-treated alloy spindle on taper roller
- JIC hydraulics, cushioned
- JIC Electrics.
- Swinging arm safety
- Low noise
- Independent clamp die, pressure die, and mandrel
Accessories and Options
1. Clockwise or counterclockwise rotation to bend.
2. Mandrel extractor and rod support.
3. Mandrel rods (one supplied w/machine).
4. Motorized mandrel tangency adjust.
5. Draw compound mandrel injector system.
6. Mandrel rods for draw compound injector.
7. Wiper die bracket.
8. Drop-away clamp.
9. Vertical die closer.
10. Auto lubricator.
11 . Direct-acting pressure die.
12. Pressure die booster.
13. overarm support.
14. Extended centerline radius capability.
15. Additional H.P.
16. Degree of bend stop systems (single stop standard)
a. Ten-stop manual advance dial.
b. Ten-stop auto advance dial.
c. Digital bend control.
17. Plane of bend and distance between bend carriage – ten stops.
18. Runout table for extrusion bending – six stops.
19. Mandrel rod stop – ten stops.
20. Extended bed length.
21. Extended POB carriage way.
22. Extended mandrel rods.
23. Extended runout table.
24. Extended rod stop assembly.
25. water-cooled spindle for heated die bending
for more click here