[email protected]  |  (810) 844-0233

Maximum bend angle180º + 15º Overbend Allowance
Hydraulic drive, standard5 HP 
Bend arm speed, (max.) adjustable15 RPM 
Plane of bendContinuous either direction, rotation 0 – 359.9º
Degree of bendResolution 0.1º , Repeatability ±0.1º
Plane of bendResolution 0.1º , Repeatability ±0.1º , Speed 10 RPM
Distance between bendsResolution 0.01º , Repeatability ±0.01º , Speed 360 IPM
Controls3-axis CNC and Manual DOB (2 stops), DBB and POB dial positioning
Approx. shipping weight, (less oil and tools)3300 lbs. 

CL-200 CNC


Round Tube – 
25,000 psi-YP, non-ferrous2.5” X .203”
40,000 psi-YP, ferrous2.5” X .109”
60,000 psi-YP, stainless steel2.0” X .125”
Schedule 80, steel pipe, IPS


(1.9” X .2”)

Round bar, mild steel1 -3/8”
Centerline radius, (max.) std.10”
Tube length over mandrel, (std.)10’

[/mk_table][/vc_column][/vc_row][vc_row][vc_column][mk_fancy_title size=”18″ font_weight=”bold” text_transform=”uppercase” font_family=”none”]Standard Features[/mk_fancy_title][vc_column_text]

  1. Automatic lubricator slides and
  2. Swinging arm safety
  3. I.C Standards.
  4. Hardened and ground
  5. Hard steel toggle pins on hard steel
  6. Heattreated alloy spindle on taper roller
  7. Low noise

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][mk_fancy_title size=”18″ font_weight=”bold” text_transform=”uppercase” font_family=”none”]Accessories and Options[/mk_fancy_title][vc_column_text]1. Bend arm clockwuse or counterclockwise rotation.
2. Mandrel extrator.
3. Wiper die support.
4. Direct acting pressure die.
5. Pressure die boost.
6. Drop away clamp.
7. Draw compound mandrel injector.
8. Vertical die closer.
9. Overarm support.
10. Extended bed length.
11. Extended centerline radius.
12. Oscillating Mandrel.
13. Safety mats.
14. Movable safety post.
15. Water cooled spindle for hot bending.
16. Addtional HP.[/vc_column_text][/vc_column][/vc_row]