| Maximum bend angle | 180º + 15º Overbend Allowance | |
| Hydraulic drive, standard | 5 HP | |
| Bend arm speed, (max.) adjustable | 15 RPM | |
| Plane of bend | Continuous either direction, rotation 0 – 359.9º | |
| Degree of bend | Resolution 0.1º , Repeatability ±0.1º | |
| Plane of bend | Resolution 0.1º , Repeatability ±0.1º , Speed 10 RPM | |
| Distance between bends | Resolution 0.01º , Repeatability ±0.01º , Speed 360 IPM | |
| Controls | 3-axis CNC and Manual DOB (2 stops), DBB and POB dial positioning | |
| Approx. shipping weight, (less oil and tools) | 3300 lbs. | |
CAPACITY
| Capacity |
CL-200 HD UTB CL-200 HD |
| Round Tube – | |
| 25,000 psi-YP, non-ferrous | 2.5” X .203” |
| 40,000 psi-YP, ferrous | 2.5” X .109” |
| 60,000 psi-YP, stainless steel | 2.0” X .125” |
| Schedule 80, steel pipe, IPS |
1-1/2 (1.9” X .2”) |
| Round bar, mild steel | 1 -3/8” |
| Centerline radius, (max.) std. | 10” |
| Tube length over mandrel, (std.) | 10’ |
Standard Features
- Automatic lubricator slides and
- Swinging arm safety
- I.C Standards.
- Hardened and ground
- Hard steel toggle pins on hard steel
- Heattreated alloy spindle on taper roller
- Low noise
Accessories and Options
1. Bend arm clockwise or counterclockwise rotation.
2. Mandrel extrator.
3. Wiper die support.
4. Direct acting pressure die.
5. Pressure die boost.
6. Drop away clamp.
7. Draw compound mandrel injector.
8. Vertical die closer.
9. Overarm support.
10. Extended bed length.
11. Extended centerline radius.
12. Oscillating Mandrel.
13. Safety mats.
14. Movable safety post.
15. Water cooled spindle for hot bending.
16. Addtional HP.