Hydraulic or Manual Pipe and Tube Bender – What is better?

Home / Blogs / Hydraulic or Manual Pipe and Tube Bender – What is better?

Hydraulic or Manual Pipe and Tube Bender – What is better?

Introduction

Hydraulic pipe benders are the most popular in the market, and they are also better in terms of performance. However, this doesn’t mean that manual pipe benders don’t have their place. When it comes to choosing between hydraulic and manual pipe benders, you should consider ease of use as well as durability. Visit www.benderparts.com

A hydraulic bender can be very helpful in certain applications.

A hydraulic bender can be very helpful in certain applications.

A hydraulic bender is more expensive than a manual tube bender, but its ease of operation makes it more suitable for making curved tubes and pipes that are bigger in diameter than what you can make with a manual tube bender.

The only drawback to using an hydraulic tube bending machine is that it takes time to set up the machine and prepare it for use. However, once the process has been completed, your work will be much easier because you won’t have any trouble bending pipes or tubes into different shapes as long as they meet certain criteria such as minimum bending radius, minimum wall thickness and maximum pipe outer diameter before bending occurs.

Visit www.benderparts.com

Hydraulic tube benders are more expensive than manual tube benders.

Hydraulic tube benders are more expensive than manual tube benders.

While both hydraulic and manual tube benders are available in a variety of sizes and shapes, the prices of hydraulic tube benders tend to be higher than those of manual ones. This is because they use a hydraulic system that forces oil through an internal spring to make the bending process easier and faster.

Visit www.benderparts.com

Hydraulic tube benders are easier to operate, but it takes more time to setup the machine.

Hydraulic tube benders are easier to operate, but it takes more time to setup the machine. Hydraulic tube benders have more moving parts, so you will need to spend some time setting them up before using them. Transporting a hydraulic tube bender is more difficult because it requires additional support for the weight of the machine and all its components. Additionally, hydraulic tube benders are usually more expensive than manual ones since they require an external power source (e.g., air compressor). Visit www.benderparts.com

Hydraulic tubing benders cannot bend very large diameter tubing and pipe which can require high powered hydraulic pumps and large volume oil tanks.

Hydraulic tubing benders cannot bend very large diameter tubing and pipe which can require high powered hydraulic pumps and large volume oil tanks. Manual tube benders are designed for smaller diameters, but with a little work you can bend anything that will fit around the mandrel.

Hydraulics have their place in the machine shop, but they do not have the flexibility of manual pipe & tube benders. For example: A 1/2-inch steel tube can be bent over 90 degrees by hand easily, but it would require way too much pressure to use hydraulics on such a small diameter.

Visit www.benderparts.com

Takeaway:You need to weigh all factors before deciding if spending a lot of money on a hydraulic bender is right for you.

You need to weigh all the factors before deciding if spending a lot of money on a hydraulic bender is right for you. Here are some things to consider:

  • What is your budget? How much time do you have and how much money are you willing to spend?
  • What jobs will you be doing with this tool? Are they repetitive or one-off tasks, or do they require precision over speed (or vice versa)?
  • Which job size tubing or pipe do you need bent (diameter) and what material does it come in (aluminum alloy, stainless steel, plastic). How far from the source of supply is the tubing/pipe going to be used—across town at a job site versus in your garage at home near where it was purchased?

Conclusion

Hydraulic or manual tube benders are effective machines that can help you make your work easier. Both have their advantages and disadvantages, but the most important thing to consider is what kind of project you will be working on. Hydraulic pipe and tube benders are more powerful than manual ones, so if you need a strong machine for heavy duty projects then these might be the best choice for your needs. Manual ones require more time and effort from the user, but they’re much cheaper which makes them ideal if price is an issue. Good luck!

Visit www.benderparts.com