AKYAPAK AKBEND Three Roll hydraulic Plate Bending Machines are available in sizes from 1/8” to 8” in thickness and in lengths from 2’ to 40’. Quality certificates such as CE and ISO 9001 are proof of AKYAPAK’s professionalism, quality and service. Standard Features: Design: Three Roll “double pinch” design advantages: Single part entry, Pre-bending of material from both sides of the machine and greater thickness capacity range. Swing Guide Arms: Offer a planetary motion and increase the power and quality of pre-bending while conserving energy. Drive: All three rolls are individually driven by planetary gear reducers and hydraulic motors. Automatic surface speed compensation between top and adjustable rolls. Drive protected against overload. Roll Rotation Speed: Machine is supplied with two speed rotation controlled by selector switch on the operator’s console. Bearings: All roll journals are mounted in sealed roller bearings reducing friction and maintenance. Electrics and Motor: Electric motor is totally enclosed, fan cooled type. Motors and other electrical equipment operate on 230/3/60 or 480/3/60 volts. All operator controls are low voltage. Digital Readouts: Two digital readouts are provided indicating precise position of the two adjustable lower rolls. Hardened Rolls: All machines are provided with induction hardened rolls, 52 to 55 Rockwell C Roll Adjustment: Both rolls are independently, hydraulically adjustable via push button on the operator’s console. Leveling system insures parallelism of both adjustable rolls. Both adjustable rolls have the ability to tilt, controlled directly from the operator’s console. Cone Rolling Attachment: Machine is equipped with a roller type cone rolling attachment. Drop End:Standard hydraulically operated drop end (hinge) controlled from operator’s console. Top roll raises when drop end is lowered for ease of part removal. Operator’s Console: All operator machine functions are located in movable rolling type console. Functions include; roll adjustment, roll rotation, roll rotation speed, open / close of drop-end and digital readouts. All roll movements are controlled by push buttons. Safety: Emergency stop cable around perimeter of machine. Emergency stop button on operator’s console. Fixed steel guard around drop end. Instant braking of roll rotation when pushbutton is released. Optional Equipment & Features Variable Speed Control for Rotation Hydraulically Operated Side Supports Hydraulically Operated Overhead Support Multi-Axis CNC Control System Oil Cooling System Infeed Tables