MANUAL TUBE BENDER – 3 AXIS – 10 STOP AUTO SELECTION

Specifications

Capacity: ¼ to 1” O.D. ferrous

¼ to 1-1/4” O.D. nonferrous

Bend Radius: 6” maximum centerline radius
Bend Angle: 180° (15° overbend)
Tube Over Mandrel: 8 feet
Mandrel Extractor: Foot pedal, 1” stroke
Clamping: Manual toggle
Collet Chuck: Lever closer (draw type)
Stops: 10 DOB (Degree of Bend – Angle Bent)

10 POB (Plane of Bend – Rotation of Tube)

10 DBB (Distance Between Bends)

Calibration: POB and DOB 1° increments; DBB 1/16” increments
Size: 12’ x 3’    6” x 40” high

Machine stops are rapidly and conveniently set to reproduce tubes with up to 10 bends. Once preset, tubes are quickly and accurately reproduced.

Accessories

•Wrench Set
•Mandrel Rod Support & Extractor
•Adaptors for 2” High Tooling
•Universal Slide Plate
•Mandrel Rod Set
•Collet Chuck

Options

1. Wiper Die Support Bracket
2. Collets as required (specify tube O.D.)
3. Bend, Clamp, Pressure & Wiper Dies. Also Mandrels – plus, formed end, & ball (Specify tube O.D., wall thickness, and material; bend radius and maximum bend angle.)
4. Slide Plate, box type, for 2” high pressure dies.
5. Adaptors for 1” high tooling.