[email protected]  |  (810) 844-0233

Refurbished or Used Tube Bender – What is your choice

www.benderparts.com  www.facebook.com/benderparts

Introduction

When it comes to selecting a used or refurbished tube bender, clients ask us what is the component difference between a used and refurbished tube bender. The answer is that refurbished benders have all their parts replaced with new ones.

For example: If you buy a used electric cable for your tube bender, it will not last long because it will be worn out by time and use of bending. But if you buy a refurbished bender its electrical cables will be replaced with new ones and so on for other components such as hydraulics hoses, pneumatic cylinders etc… In addition these components are checked for any damages before being put back together again to ensure safety in usage.”

 

www.benderparts.com  www.facebook.com/benderparts

 

Lot of times when it comes to selecting a used or refurbished tube bender, clients ask us what is the component difference between a used and refurbished tube bender.

When clients ask us what the difference is between a used and refurbished tube bender, we have to explain that both are pre-owned machines. A used tube bender has been previously owned by another company. A refurbished tube bender has been inspected, cleaned and repaired by trained technicians before being put into service for your company. In addition to having all of the components inspected, refurbished units receive brand new cables, harnesses, die sets and mandrels as needed during their inspection process.

 

www.benderparts.com  www.facebook.com/benderparts

 

Production Tube bending is proud to offer complete service components for all types of tube benders.

We have all the parts you need in stock, so if a part should fail on your tube bender, we can get it to you fast. We know that downtime is costly and we want to help minimize the amount of time it takes for you to get back up and running. You may be wondering what kind of parts are available from Production Tube Bending? The list below describes just some of the products we carry:

Pumps

Valves

Cylinders

Hoses

Do you need an electric cable, wiring harness for your tube bending machine? We can help you.

If you are looking to buy a used or refurbished tube bender, then you should know that the wiring harness will be a crucial component of your machine.

Before we proceed with the buying guide, let’s understand what a wiring harness is and how it works. A wiring harness is a set of wires and cables which are used to connect various electrical devices together in an electrical system like automobiles, aircrafts etc., so that they can work together efficiently without any problems. Wiring harnesses can be made from both copper or fiber; however, most commonly used material is copper since it has high conductivity compared to fiber optic cable. When these cables are installed in an automobile then they are referred as “wiring loom” or “cable assembly”; however when these wires are installed inside computers then they are referred as “cable harnesses”.

www.benderparts.com  www.facebook.com/benderparts

 

You are looking for a used mandrel, a mandrel puller, or even a hydraulic or pneumatic power-driven mandrel extractor? We have them all.

If you are looking for a used mandrel, a mandrel puller, or even a hydraulic or pneumatic power-driven mandrel extractor? We have them all. Have you ever wondered if there is anything like that out there? The answer is yes!

Used tube benders can be found in many places. When buying one of these machines, it’s important to know what kind of condition it’s in before committing to the purchase. A refurbished tool is usually less expensive than new and often comes with warranty coverage as well as manufacturer support services if needed.

Do you want to buy a used cylinder and piston? We can provide you with this component.

If you are planning to buy a used cylinder and piston, it is important to know that this type of component is critical for the operation of your tube bender. If the cylinder or piston are not functioning properly, you will be unable to bend any tubes. This can create problems with your workflow as well as result in expensive downtime costs.

However, we offer refurbished and reconditioned cylinders and pistons that can work perfectly with your tube bender. We also provide excellent customer service if there should be any issues after installation or during operation!

www.benderparts.com  www.facebook.com/benderparts

 

Production Tube Bending has access to all critical parts that keep your tube bender working.

When you need the right parts, Production Tube Bending has access to all critical parts that keep your tube bender working. We have a range of pumps, valves and cylinders for any kind of machine you may have. We also offer a full supply of nuts and bolts, pins for your mandrel extracting.

www.benderparts.com  www.facebook.com/benderparts

In addition to these components we also offer repair services and replacement parts for hydraulics systems in your tube bending machines. We have access to a wide range of pumps, valves, cylinders and hoses for any kind of tube bending machine you may have.

In addition to these components we also offer repair services and replacement parts for hydraulics systems in your tube bending machines. We have access to a wide range of pumps, valves, cylinders and hoses for any kind of tube bending machine you may have. Our extensive knowledge base allows us to solve even the most complex problems quickly and efficiently. If you are looking for used or refurbished tube benders that are ready to go right away, then we can offer this option as well.

www.benderparts.com  www.facebook.com/benderparts

 

Do you need nuts and bolts, pins for your mandrel extracting? We have them too.

A tube bender is a useful tool for bending steel and aluminum. In order to make sure that the material doesn’t bend off-center, nuts and bolts are used as a mandrel puller. This means that you need to remove the pin from your tube bender after using it in order to extract the mandrel from inside of it. You should also check if there are any missing parts before purchasing your used or refurbished tube bender because this will cause damage on its own!

www.benderparts.com  www.facebook.com/benderparts

 

Refurbished benders are better than used benders because their components such as cables, harnesses, die, mandrels and more are replaced with new parts.

If you are planning to buy a used tube bender, you should be aware of its shortcomings. The components of the tube bender can wear out due to prolonged usage. Some components need regular maintenance in order to function properly. The motor may not be powerful enough and may cause frequent breakdowns while bending the tubes. Due to lack of proper maintenance or repair, used tube benders often fail during production work causing downtime and loss in productivity as well as money spent on repairs instead of paying for new equipment.

In contrast refurbished machines have been tested using various methods for their durability and performance before being sold off at reasonable prices compared with new ones; hence they come with warranties from manufacturers who guarantee their quality standards for years after purchase by customers like us!

www.benderparts.com  www.facebook.com/benderparts

 

Conclusion

In conclusion, refurbished tube benders are a great way to save money and get a high-quality product. They have all the benefits of used machines but at lower costs due to their more extensive inspection and repair process. When you buy a refurbished machine from Production Tube Bending, we can guarantee that it will last for years before needing any repairs.

www.benderparts.com  www.facebook.com/benderparts

#Pinesbender #pines4hydraulictubebender #tubebender #tubebenderrebuilding #pinesbenderparts #ultimatetubebenderparts #tubebending #TUBEBENDERDAVE #pinestubebender