The Pines Used Bender
The Pines Used Bender has been fully serviced and tested. This machine is in good working condition with a few minor cosmetic blemishes that do not effect operational performance.
www.benderparts.com www.facebook.com/benderparts
Brand: Pines
Pines is a manufacturer of benders. Pines was founded in 1949 by two brothers, and has been family owned ever since. The company has grown to become one of the largest manufacturers of bending machines in North America and has offices all over the world. Pines is known for their high quality machines that can be found in many tool shops around the globe.
www.benderparts.com www.facebook.com/benderparts
Model Number: #2
The Model #2 Pines Used Bender is a great tool for anyone who needs to bend metal and has limited space. This machine was designed to be easy to use, so you can get started right away without any training or experience.
The Bender is built from heavy duty steel with all moving parts designed for years of dependable operation. It features an adjustable work table that allows you to shape your material into any shape needed for your project.
This Bender comes with everything needed for immediate use:
- Electric Motor (1/3 HP)
- Power Cord
- V-Belt Drive System
- Hydraulic Pump/Motor Assembly
Shaft Diameter: 2.00″
The shaft diameter is 2.00″ and measures the diameter of the bar that the machine bends. This measurement is taken at the center of the shaft, not including any threads or other components that may be attached to it.
www.benderparts.com www.facebook.com/benderparts
Shaft Length: ~60″
The shaft length is ~60″, which can be adjusted to different lengths. The longer the shaft, the greater your ability to bend larger pipes.
It’s important for you to know that this machine has been fully serviced and tested. This machine is in good working condition with a few minor cosmetic blemishes that do not effect operational performance.
www.benderparts.com www.facebook.com/benderparts
Diameter of Bar to be Bent: 1-1/4″ Pipe (2″ Sch 40)
The diameter of bar to be bent: 1-1/4″ pipe (2″ Sch 40). The Bender is capable of bending up to a 2 inch pipe, but not the thicker 3 inch material.
www.benderparts.com www.facebook.com/benderparts
H.P.: 7.5
The 7.5 HP motor is a good size for this machine, not too big and not too small. It’s a standard size for this type of equipment.
The 7.5 HP motor will provide plenty of power to get the job done whether you’re working with softwood or hardwood logs, making it ideal for your needs as an individual or small business owner who wants to be able to process logs on-site without needing additional equipment like chippers or saw mills in order to do so.
www.benderparts.com www.facebook.com/benderparts
Voltage 220/440 3 Phase
This Pines Used Bender has been fully serviced and tested. This machine is in good working condition with a few minor cosmetic blemishes that do not effect operational performance.
The Bender comes with 3 phase power, which is standard for most industrial machines.
www.benderparts.com www.facebook.com/benderparts
Fully serviced and tested Pines Used Bender for sale
This Pines Used Bender has been fully serviced and tested. This machine is in good working condition with a few minor cosmetic blemishes that do not effect operational performance. The machine has been inspected for any damage or wear and tear, repaired as needed, and thoroughly cleaned before being offered for sale.
The frame of this machine is constructed from heavy duty steel that has been powder coated to prevent rusting. The bed rolls are made from high quality cast iron rollers with sealed bearings which allows them to smoothly move over the balks without wearing out quickly like plastic rollers would do over time (see video below).
This machine comes with two hydraulic cylinders which means it can be operated at different speeds depending upon what type of material needs to be bent around corners or curves without damaging either side paneling because there is no force coming directly against them during operation; this also makes it easier than ever before when trying hardwoods such as oak–even if they’re extremely thick!
www.benderparts.com www.facebook.com/benderparts
Conclusion
If you are looking for a Pines Used Bender, this machine is in good working condition with a few minor cosmetic blemishes that do not effect operational performance. This machine is ready to go and will save you time and money by allowing you to do your own bending instead of hiring someone else do it for you. If interested in purchasing this machine please contact us today!