Clarke & Lewis UTB CL-200 Hydraulic Tube Bender
(WE CURRENTLY ARE NOT MANUFACTURING THIS BENDER. WE CAN PROVIDE REPLACEMENT PARTS, SERVICE OR CONTROL UPGRADES)
The CLC 200 benders are noted for reliability and productivity. The clamp and pressure die bolsters mount on hard, precision-ground steel slides riding on fitted bronze ways.
| Maximum Bend Angle | 180º + 15º Overbend Allowance | |
| Hydraulic Drive (Std.) | 5HP | |
| Bend Arm Speed (Max.) Adjustable | 17 RPM | |
| Bend Arm Accuracy | Within ± 1/4º | |
| Approx. Shipping Weight (Less Oil & Tools) | 2780 lbs. | |
| Capacity | CL-200 UTB CL-200 |
Round Tube – 25,000 psi-YP, non-ferrous 40,000 psi-YP, ferrous 60,000 psi-YP, stainless steel |
1.5” X .188” 1.5” X .109” 1.5” X .049” |
| Schedule 80, steel pipe, IPS | 1 (1.315” X .179”) |
| Round bar, mild steel | 1 -1/8” |
| Centerline radius, (max.) std. | 10” |
| Tube length over mandrel, (std.) | 10’ |
- Hardened and ground
- Hard steel toggle pins on hard steel
- Heat-treated alloy spindle on taper roller
- JIC hydraulics, cushioned
- JIC Electrics.
- Swinging arm safety
- Low noise
- Independent clamp die, pressure die, and mandrel
Accessories and Options
1. Clockwise or counterclockwise rotation to bend.
2. Mandrel extractor and rod support.
3. Mandrel rods (one supplied w/machine).
4. Motorized mandrel tangency adjust.
5. Draw compound mandrel injector system.
6. Mandrel rods for draw compound injector.
7. Wiper die bracket.
8. Drop-away clamp.
9. Vertical die closer.
10. Auto lubricator.
11 . Direct-acting pressure die.
12. Pressure die booster.
13. overarm support.
14. Extended centerline radius capability.
15. Additional H.P.
16. Degree of bend stop systems (single stop standard)
a. Ten-stop manual advance dial.
b. Ten-stop auto advance dial.
c. Digital bend control.
17. Plane of bend and distance between bend carriage – ten stops.
18. Runout table for extrusion bending – six stops.
19. Mandrel rod stop – ten stops.
20. Extended bed length.
21. Extended POB carriage way.
22. Extended mandrel rods.
23. Extended runout table.
24. Extended rod stop assembly.
25. water-cooled spindle for heated die bending[/vc_column_text][/vc_column][/vc_row]
For more click here