| Maximum Bend Angle | 180º + 15º Overbend Allowance | |
| Hydraulic Drive (Std.) | 15HP | |
| Bend Arm Speed (Max.) Adjustable | 2.3 RPM | |
| Bend Arm Accuracy | Within ± 1/4º | |
| Approx. Shipping Weight (Less Oil & Tools) | 14000 lbs. | |
CAPACITY
| Capacity | CL-400 UTB CL-400 |
Round Tube – 25,000 psi-YP, non-ferrous 40,000 psi-YP, ferrous 60,000 psi-YP, stainless steel |
6” X .250” 6” X .165” 6” X .125” |
| Schedule 80, steel pipe, IPS | 4 (4.5” X .337”) |
| Round bar, mild steel | 3 -1/2” |
| Centerline radius, (max.) std. | 24” |
| Tube length over mandrel, (std.) | 12’ -6” |
[/mk_table][/vc_column][/vc_row][vc_row][vc_column][mk_fancy_title size=”18″ font_weight=”bold” text_transform=”uppercase” font_family=”none”]Standard Features[/mk_fancy_title][vc_column_text]
- Hardened and ground
- Hard steel toggle pins on hard steel
- Heat-treated alloy spindle on taper roller
- JIC hydraulics, cushioned
- JIC Electrics.
- Swinging arm safety
- Low noise
- Independent clamp die, pressure die, and mandrel
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][mk_fancy_title size=”18″ font_weight=”bold” text_transform=”uppercase” font_family=”none”]Accessories and Options[/mk_fancy_title][vc_column_text]1. Clockwise or counterclockwise rotation to bend.
2. Mandrel extractor and rod support.
3. Mandrel rods (one supplied w/machine).
4. Motorized mandrel tangency adjust.
5. Draw compound mandrel injector system.
6. Mandrel rods for draw compound injector.
7. Wiper die bracket.
8. Drop-away clamp.
9. Vertical die closer.
10. Auto lubricator.
11 . Direct-acting pressure die.
12. Pressure die booster.
13. overarm support.
14. Extended centerline radius capability.
15. Additional H.P.
16. Degree of bend stop systems (single stop standard)
a. Ten-stop manual advance dial.
b. Ten-stop auto advance dial.
c. Digital bend control.
17. Plane of bend and distance between bend carriage – ten stops.
18. Runout table for extrusion bending – six stops.
19. Mandrel rod stop – ten stops.
20. Extended bed length.
21. Extended POB carriage way.
22. Extended mandrel rods.
23. Extended runout table.
24. Extended rod stop assembly.
25. water-cooled spindle for heated die bending
For more click here[/vc_column_text][/vc_column][/vc_row]