Clarke & Lewis UTB CL-610 Hydraulic Tube Bender

NSN 3441-01-190-5472

(WE CURRENTLY ARE NOT MANUFACTURING THIS BENDER. WE CAN PROVIDE REPLACEMENT PARTS, SERVICE OR CONTROL UPGRADES)

Clarke & Lewis UTB CL-610 Hydraulic Tube Bender

The (-10) series Precision Bending Machines feature simplicity and rugged construction.

The machine design provides capability for forming large centerline radii.

The tube/pipe is clamped directly to the bend die by a hinged clamp die. The bend die and attached clamp die rotate to form the bend. The pressure die travels with the tube/pipe during bending.

The hydraulically-actuated direct-acting pressure die is adjustable by manual control. Constant force, independent of pressure die position, tube O/D or wall variations, is applied via the direct- acting hydraulic cylinder.

The mandrel boom is adjustable for various centerline radii and is removable for storage. An outboard end support is furnished as standard.

Standard model (as shown) rotates clockwise; opposite hand rotation is available on order.

All machines are equipped with JIC cushion cylinders, JIC electrical system, hardened and ground mounting surfaces and a pressure die master bar. The pressure die master bar travels on needle bearings. Bend spindle is heat- treated alloy and rotates on tapered Timken roller bearings. All controls are located in a safe area at the rear of the machine.

Specifications

Max Radius

For Max. Tube Capacity OD.*

42”
Maximum bend angle 180º + 15º Springback Allowance
Tube Length 12’ – 6” Maximum Tube Length over Mandrel
Hydraulic drive 15HP
Bend Angel Control Single Position Auto Stop Adjustable 0 to 195º
Bending Arm Accuracy Repeats to within 1/4º
Max. Operating Pressure 2000 PSI
Power 3 Phase: 60 Hertz: 230/460 V
Dimensions 4” x 10’
13’ Mandel Boom
Shipping Weight Less Oil & Tools (Approx.) 7000 lbs.

CAPACITY

Capacity 610

UTB CL-610

Steel Pipe Sch 80 6

(6.625” X .432”)

Round tubing Non-ferrous

Y.P. to 25.000 PSI

7 1/2 x .250
Round tubing

Mild Steel Y.P. to 40.000 PSI

7 1/2 x .093
Round tubing Non-ferrous Stainless Steel Y.P. to 60.000 PSI 6 3/4 x .188

Accessories and Options

  1. Hydraulically-actuated toggle clamp die with manual
  2. Higher HP motor for increased
  3. Remote, multiple push button station, controls for BEND, PRESSURE DIE, CLAMP DIE, MANDREL, PUMP START, EMERGENCY
  4. Wiper die support
  5. Mandrel rod stops for setting distance between bends (10 maximum).
  6. Automatic mandrel lube injector for lubricating through
  7. Extended tube length over
  8. Mandrel rods (one supplied with machine; specify size).
  9. Degree of bend stops. Maxiumum of 10 individual adjustable stops manually selected from the control
  10. Digital Bend Electronic digital stop system with memory for 40 bends. Accuracy of control is 0.1°. Con- trolled by keyboard on console and self-indexing.
  11. Extended maximum radius over the
  12. Powered indexing carriage for plane of bend (POB) and distance between bend (DBB).