A used tube bender
When you need a new tube bender, it can be tempting to spend tens of thousands of dollars on one. But what if I told you that there’s another option? That’s right: buying a used tube bender. You might be wondering why anyone would buy such an expensive piece of machinery when they could just get something cheap off Craigslist or eBay. Well, as it turns out, there are plenty of good reasons! In this article I’ll give you all the information you need to decide whether it makes sense for your business to buy new or used when it comes time to invest in a bending machine for your shop (hint: buying used is always better).
www.benderparts.com www.facebook.com/benderparts
Do you want to spend tens of thousands of dollars on a new tube bender, or do you want to save your money and get a perfectly usable used tube bender for half that, or less?
Do you want to spend tens of thousands of dollars on a new tube bender, or do you want to save your money and get a perfectly usable used tube bender for half that, or less?
It’s a simple choice! If you’re looking for an economical option that doesn’t sacrifice quality, then buying a used tube bender is the way to go. It will last almost as long as its more expensive counterpart and cost much less upfront.
www.benderparts.com www.facebook.com/benderparts
Buying a new tube bender can cost you tens of thousands of dollars.
A new tube bender can cost you tens of thousands of dollars. A used tube bender, on the other hand, will cost you a fraction of that.
The reason why new tube benders are so expensive is because they’re made with high quality materials and have many features that make them more efficient to use than others. Used machines are still good machines but they don’t have all these extra features; they’re just regular old tube benders.
www.benderparts.com www.facebook.com/benderparts
A used tube bender can be found in good shape for much less.
If you’re looking to buy a used tube bender, there are plenty of ways to find one. You can check eBay and Craigslist for listings, or search online auction sites like Amazon Marketplace and Etsy. If you’re lucky, you might even find one at a garage sale or flea market!
You might think that buying used would be more expensive than buying new–but that isn’t always the case! Many times people will sell their machines for half of what they paid for them because they bought them without knowing what they were getting into (if you know what I mean).
www.benderparts.com www.facebook.com/benderparts
When buying a used tube bender, choose one that has a working PLC.
When buying a used tube bender, choose one that has a working PLC. The PLC (programmable logic controller) is a computer that can control all the functions of the tube bender. It’s similar to using an iPhone or iPad–you can set up your machine with buttons on the panel and then program them individually to do whatever you want them too! This makes it easier for you to use and more efficient overall because you won’t have to do anything manually once everything is set up correctly. If your machine doesn’t have this feature already built-in, then it may not be worth purchasing since it would take extra time and effort on your part just trying figure out how everything works without being able to just press buttons like most other machines allow users do today.”
www.benderparts.com www.facebook.com/benderparts
With the right maintenance, your used tube bender will last almost as long as a new one.
If you want to keep your used tube bender in good working order, there are a few things you can do. First and foremost, keep it clean. This means washing it down with warm water and soap every once in awhile (depending on how often you use it), as well as wiping down all of the moving parts with an oiled cloth or rag.
Keep an eye on any wear and tear that occurs on these parts so that they don’t get too damaged before their time–you don’t want them breaking down suddenly during an important job! You should also make sure that the machine is greased at least once every six months or so; this will prevent squeaking noises from occurring when the machine bends metal bars into shapes like circles or squares.
Finally: use your tube bender regularly! If possible, try not to leave it sitting around idle for long periods of time; this could cause damage over time due to rusting within certain components’ internal mechanisms. Also remember that while most benders come equipped with safety features like interlocks which prevent them from operating unless both doors are closed securely (or else risk injury), no matter how careful we may be there’s always some risk involved when using power tools such as these ones so please do not allow children unsupervised access until they’ve reached maturity beyond puberty level maturity stage 4 (10 years old).
www.benderparts.com www.facebook.com/benderparts
You don’t have to spend an arm and a leg on a new tube bender when you can get the same thing in good shape without breaking the bank.
You don’t have to spend an arm and a leg on a new tube bender when you can get the same thing in good shape without breaking the bank. A used tube bender will cost you less than half the price of a new one, and it may even be in better condition!
If you’re looking for something specific, like an older model with an operating PLC or one that has been well-maintained over time, there are many options available online. You can also find plenty of machines at scrap yards or local auctions for dirt cheap prices.
www.benderparts.com www.facebook.com/benderparts
Conclusion
If you’re looking for a tube bender, I hope this article has given you some insight into whether or not buying a used machine is right for your business. If so, then go ahead and check out our selection of used tube benders here at TubeBenderPros.com! We work hard every day to ensure that all of our machines are inspected by experts before being listed on our website so that customers can feel confident in their purchase from start to finish. And if there are any questions about anything at all – from shipping information down to payment methods – please don’t hesitate contacting us here at TubeBenderPros ([email protected]). We would love hearing from you!
www.benderparts.com www.facebook.com/benderparts
#Pinesbender #pines4hydraulictubebender #tubebender #tubebenderrebuilding #pinesbenderparts #ultimatetubebenderparts #tubebending #TUBEBENDERDAVE #pinestubebender