LONG LENGTH DOUBLE END CHAMFERING

Tube chamfering capacity up to OD 76 mm

With the SOCO FM series chamfering machine for Double Tube Ends Chamfering + Length Measuring, it is possible to simultaneously chamfer both ends of a tube, with up to 3000 mm in working length , as well as measure their lengths with tolerances as low as +/- 0.02 mm.
With an optional BTM (Bundle Loading Magazine), the machines offer a completely automatic loading, feeding, chamfering and length measuring processes.
Using an absolute length measuring system (against a calibrated piece), the machines may also be programmed to stop after a certain number of pieces do not fall within the specified length tolerance.
This range is suitable for a clean and even chamfer on both ends of the tube, with chamfering the inside + outside (I/O) and face of the material or making a radius (round) chamfer than measuring its length.  It may also be used for outside chamfering of solid bars (*).
(*) Depending on material’s weight and tensile strength

AUTOMATION

  • Fully automatic chamfering and Length Measuring system, with 2 types of loading magazine:

– Rack – Sliding Magazine ( Standard )
– BTM – Bundle Loading Magazine (Optional )

  • External and internal chamfering facing with length measuring in 1 process for both sides of the tube, with optional radius (round) chamfering
  • Optional motorized length adjusting

VERSATILITY AND RANGE

  • Fully automatic chamfering and Length Measuring system, with 2 types of loading magazine:

– Rack – Sliding Magazine ( Standard )
– BTM – Bundle Loading Magazine (Optional )

  • External and internal chamfering facing with length measuring in 1 process for both sides of the tube, with optional radius (round) chamfering
  • Optional motorized length adjusting

PERFORMANCE

  • Cycle Times as short as 6 seconds
  • Patented feeding system for the work piece, ensuring a smooth process throughout
  • The rigid tool seat has been designed for durability, with easily fixable tool bits for longer working life
  • 2 steps chamfering process:
    – First step ——— Fast approach for time saving
    – Second step —– Infinitely adjustable chamfering speed for smooth finish
  • The length tolerance of each working piece can be controlled within +/- 0.05 mm ~ +/- 0.1 mm
  • The length tolerance can be measured down to +/- 0.02 mm
  • The Gantry transport system (FM-60ss) and “Walking Beam” system (FM-76V) ensure that the work pieces are not damaged or scratched through the entire machining process.
  • The machine bed’s heavy casting and head stock can absorb working vibrations, providing a continuous and stable operation

SOCO CHAMFERING & MEASURING VIDEOS